How to Tie a Mattress to a Car Roof Rack

Disclaimer: FissionAuto may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 28, 2022

Moving a mattress by car is not as difficult as it may seem. With the right supplies and some careful planning, you can easily tie a mattress to a car roof rack. Here are the steps you need to take:

1. Choose the right size mattress for your car. If you have a small car, it may be best to choose a twin size mattress. For larger cars, full or queen size mattresses will work better.

2. Make sure your car roof rack is secure and has enough support to hold the weight of the mattress. 3. Place the mattress on top of the roof rack and begin tying it down using rope or straps. Start at one end of the mattress and work your way around, making sure each side is securely fastened.

4. Once all sides are tied down, double check that everything is tight and secure before driving off.

  • Open the car’s trunk and remove any items that are already on the roof rack
  • Spread out a tarp on the ground next to the car
  • This will help protect your mattress from getting dirty or wet
  • Place the mattress on top of the tarp and center it in the middle
  • Fold one end of the tarp up over the mattress, and then begin rolling it towards the other end, keeping it as tight as possible
  • Once you’ve rolled up the entire mattress, tie each end of the tarp with a rope or bungee cord to keep it secure
  • Carry the mattress to your car and place it on top of the roof rack, securing it with more ropes or bungee cords if necessary

Is It Safe to Tie a Mattress to the Roof of a Car?

Assuming you’re talking about a standard sedan with a trunk, and not some sort of SUV or van with a roof rack, the answer is no, it is not safe to tie a mattress to the roof of your car. There are several reasons for this. First and foremost, mattresses are not aerodynamic.

In other words, they create drag when driving, which lowers your gas mileage and makes it harder to drive (especially in windy conditions). Additionally, they can block your view out the rear window – not ideal when changing lanes or backing up. Second, mattresses are heavy – often 50-100lbs or more.

This extra weight puts strain on your car’s suspension and brakes, and can make steering more difficult. It also increases wear and tear on tires and may even cause them to blow out if you hit a pothole or bump in the road too hard. Finally, mattresses are large and unwieldy objects that are difficult to secure properly.

If they come loose while you’re driving (and it’s all too easy for them to do so), they can damage your car – or worse, injure someone if they fly off into traffic.

How Do You Attach a Mattress to a Car Roof?

Assuming you have a roof rack, there are four general steps to follow: 1. Place the mattress on the roof of the car and center it as best as possible. You want to make sure that the mattress is secure and will not slide around while you are driving.

2. Using straps or rope, tie the mattress down to the roof rack. Be sure to use a sturdy knot so that the mattress will not come loose while you are driving. 3. If your car has a sunroof, be sure to close it before driving off.

The last thing you want is for your mattress to fly off the roof! 4. Drive carefully and enjoy your comfortable ride!

What Kind of Rope Do You Use to Tie a Mattress to a Car?

If you’re planning on tying a mattress to your car, you’ll need to use a rope that can support the weight of the mattress and won’t damage your car. A good option is a sturdy nylon rope. You’ll want to choose a rope that’s at least 1 inch in diameter so it can hold the weight of the mattress without breaking.

Make sure to measure the length of the rope you’ll need before you buy it so you don’t end up with too much or too little. Once you have your rope, tie it securely to the back of your car using a knot that won’t come undone easily. If you’re concerned about damaging your car, you can put a piece of cardboard or another thin material between the rope and the car to prevent scratching.

How Do You Strap down a Mattress?

In most cases, you will not need to strap down a mattress. However, there may be some special circumstances where it is necessary. For example, if you are travelling with a mattress or moving it to a new location, you may need to secure it so that it does not move around during transport.

There are several ways to do this, depending on the type of mattress and the materials available to you. One option is to use straps that go around the entire mattress. These can be found at many stores that sell mattresses or moving supplies.

Another option is to use rope or bungee cords to tie down the corners of the mattress. This method works well if the mattress is being placed in the back of a truck or on top of another piece of furniture. If possible, try to avoid putting any pressure on the middle of the mattress as this can damage it over time.

Once your mattress is secured, make sure that it cannot move around by testing it yourself or having someone else sit on top of it while you drive or move it into place. It is important to take extra care when handling mattresses so that they do not become damaged and unusable. With proper care and handling, your mattress should last for many years without issue!

How to Safely Transport a Mattress on the Roof of Your Car

How to Tie Mattress to Roof Rack With Rope

Here’s how to tie a mattress to a roof rack with rope: 1. Start by tying one end of the rope around the front left corner of the mattress. 2. Then, take the rope over the top of the mattress and tie it around the front right corner.

3. Next, bring the rope down the back side of the mattress and tie it around the rear left corner. 4. Finally, take the rope over the top of the mattress again and tie it around the rear right corner.

Ratchet Strap Mattress to Roof Rack

If you’re looking for a way to secure your mattress to your roof rack, a ratchet strap is a great option. Ratchet straps are designed to be tightened down, so you can get a good, tight fit that will keep your mattress in place. Plus, they’re relatively inexpensive and easy to find.

Here’s what you need to know about using ratchet straps to secure your mattress to your roof rack. First, make sure that your mattress is clean and dry before you start. Then, position the mattress on the roof rack so that it’s centered and secure.

Next, take the ratchet strap and run it through the middle of the mattress. Make sure that the strap is long enough to reach around the entire perimeter of the mattress. Once you have the strap in place, begin tightening it down until the mattress is snug against the roof rack.

You may need to use two or more straps depending on the size of your mattress. Once everything is tight and secure, give yourself a pat on the back – you’ve just successfully secured your mattress to your roof rack!

Mattress on Car Roof Illegal

Most people don’t know that it’s illegal to transport a mattress on the roof of a car. It may seem like a harmless way to save space, but it can actually be quite dangerous. If the mattress isn’t securely fastened, it could easily come loose and fly off the car, causing serious damage or even injuring someone.

Not only is this practice illegal in many states, but it’s also against most car rental agreements. So if you’re planning on taking a road trip and need to save some space, be sure to leave the mattress at home. Your safety (and the safety of others) is more important than saving a few bucks on gas.

How to Tie Planks to Roof Rack

Assuming you have a roof rack, there are a few ways to tie your plank(s) down. If you have crossbars, you can use rope or ratchet straps to secure the planks by looping them around the bars. If your crossbars are close together, you may be able to fit the planks inside and use cam straps to hold them in place.

Another option is to tie the planks directly to the roof rack itself using rope or straps. This may require some creative tying, but it can be done! Whichever method you choose, make sure the knots are tight and secured before hitting the road.

You don’t want your planks flying off mid-transit!

Ratchet Strap Mattress to Car

If you’re planning on moving your mattress by yourself, you’ll need to secure it to your car somehow. This is where a ratchet strap comes in handy. A ratchet strap is a length of webbing with a ratcheting mechanism attached to one end.

You can use it to tie down large, bulky items like mattresses. Here’s how to do it: 1. Place the mattress on top of your car and position it so that the straps will be able to reach the ground.

2. Attach one end of the strap around the mattress and loop it through the ratcheting mechanism. 3. Pull the strap tight and secure it by ratcheting down on the mechanism. Repeat this step for the other side of the mattress.

4. Once both sides are secured, you can attach additional straps if needed (across the middle of the mattress, for example).

Is It Illegal to Tie Something to the Roof of Your Car

If you’ve ever seen someone driving down the highway with a couch or mattress strapped to the roof of their car, you may have wondered if it’s actually legal to do so. The answer is, it depends. In most states, it is legal to tie something to the roof of your car as long as it is securely fastened and does not obstruct your view.

However, there are a few states that have more specific laws about what can be transported on the roof of a vehicle. For example, in California, any object that protrudes more than four inches from the edge of the roof must be marked with a red flag or light so that other drivers are aware of it. Additionally, if you are stopped by police for having an object protruding from your car, they may ask you to remove it if they deem it to be a safety hazard.

So while you may not get into legal trouble for tying something to the roof of your car, it’s always best to check your local laws before doing so.

Best Rope to Tie Mattress to Car

Most people don’t think about what kind of rope to use when they tie a mattress to the top of their car. But, if you’re planning on doing this, it’s important to choose the right rope for the job. The best rope to tie a mattress to a car is one that is strong and durable, but also flexible enough to be easily tied and untied.

Nylon rope is a good option for tying a mattress to a car. It’s strong and durable, but also has some give, which makes it easy to work with. Another option is polypropylene rope, which is even stronger than nylon.

However, it can be more difficult to work with because it doesn’t have as much give. Whichever type of rope you choose, make sure it’s at least 3/8-inch thick so that it can support the weight of the mattress without breaking. When tying the mattress to the car, start by looping the rope around one end of the mattress and then tying it off with a knot.

Next, loop the other end of the rope around the roof rack or other secure point on the car. You may need someone else to help hold onto the mattress while you do this. Once both ends of the rope are securely tied off, double check all of your knots before driving away.

Mattress on Roof Rack

A mattress on roof rack is a great way to get some extra sleeping space when traveling. It can also be a good way to save money on hotels. Here are some things to consider when using a mattress on roof rack:

– Make sure the mattress is securely fastened to the roof rack. – In hot weather, keep the mattress covered with a tarp or other material to protect it from the sun. – In cold weather, make sure the mattress is well insulated so you don’t freeze during the night.


If you’re moving a mattress or need to transport one for any reason, you’ll need to know how to tie a mattress to a car roof rack. It’s not as difficult as it sounds, and with a few basic supplies, you can have your mattress securely fastened in no time. Here’s what you’ll need:

-4 rope or bungee cords -1 tarp First, lay the tarp out on the ground and place the mattress on top of it.

Center the mattress on the tarp so there’s an equal amount of fabric hanging off all sides. Take two of the rope or bungee cords and loop them around each end of the mattress. Pull the cords tight and tie them off so they’re secure.

Repeat this step with the remaining two cords, but loop them around the width of the mattress instead of the length. Now that all four corners are tied down, lift up the entire assembly and place it onto your car roof rack. Make sure that it’s centered and secured before driving away.

Author: Charles King

Charles King is an automotive enthusiast with a keen interest in the latest technologies and products. He likes to educate himself and help other car lovers by sharing his knowledge. This website is a place for him to share his thoughts and experiences.

Leave a Comment