How to Replace Velcro on Tonneau Cover

Disclaimer: FissionAuto may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 21, 2022

If you have a tonneau cover with Velcro, chances are good that eventually the Velcro will need to be replaced. While it’s not a difficult task, it is one that requires a bit of time and patience.

  • Remove the old Velcro from the tonneau cover using a pair of pliers
  • Cut two strips of new Velcro to the same size as the old strips
  • Peel off the backing from one side of each new strip and adhere it to the corresponding side of the tonneau cover
  • Press firmly to ensure a good bond
  • Repeat Step 3 for the other side of the Velcro strips, making sure that they are aligned with the first set of strips

How Do I Change the Velcro on My Access Tonneau Cover?

If you have an access tonneau cover, then you know how great they are for protecting your truck bed and keeping your belongings dry and secure. But over time, the Velcro strips that hold the cover in place can become worn out or damaged, making it difficult to keep the cover tight and secure. Luckily, changing the Velcro on your access tonneau cover is a quick and easy process that anyone can do.

First, you’ll need to remove the old Velcro strips from the cover. Use a utility knife or scissors to carefully cut through the adhesive backing of each strip. Once all of the old strips are removed, clean off any leftover adhesive from both the cover and the truck bed with a rag soaked in rubbing alcohol.

Next, measure and cut new Velcro strips to fit in their place. Adhesive-backed Velcro is available at most hardware stores – just be sure to get strips that are wide enough to fully coverage the width of the Tonneau cover panels. Once your new strips are cut to size, peel off the backing paper and stick them into place on both the truck bed liner and Tonneau cover panel edges.

Press firmly on each strip to ensure good contact between the adhesive and surface below. Finally, reattach your access Tonneau cover following manufacturer’s instructions – typically this just involves snapping it back into place on top of your truck bed rails. That’s it!

With fresh new Velcro holding everything securely in place, you can rest assured that your belongings will stay put no matter where you go.

How Do You Restore an Old Tonneau Cover?

If you have an old tonneau cover that you want to restore, there are a few things you can do to bring it back to life. First, start by giving it a good cleaning. If the cover is made of vinyl, you can use a mild soap and water solution to clean it.

If the cover is made of canvas, you can spot clean it with a damp cloth. Once the cover is clean, apply a conditioner or protectant to help keep it from drying out and cracking. You can then use a fabric sealant or waterproofing spray to help prolong its life.

Finally, if the cover has any hardware (such as snaps or hinges), make sure they are in good working order before using the cover again.

How Do You Take Apart a Tonneau Cover?

Assuming you are talking about a hard tonneau cover: To remove your hard tonneau cover, you will need to first remove any clamps or bolts that are holding it in place. Once these are removed, you should be able to lift the cover off of your truck bed.

If there are any hinges holding the cover in place, you will need to disconnect these as well before the cover can be fully removed.

How Does a Tonneau Cover Attach?

A tonneau cover is a hard or soft cover that fits over the bed of a pickup truck. There are several ways to attach a tonneau cover, depending on the type you have. Hard covers usually snap or clamp onto the side of the bed, while soft covers typically zip or velcro shut.

Some covers also come with bows and clips that help to keep them in place.

How to replace Tonneau cover Velcro! (ACCESS COVER)

Truxedo Tonneau Cover Velcro Replacement

If you have a Truxedo tonneau cover, then you know how convenient it is to have. But what do you do when the velcro starts to wear out? Fortunately, replacing the velcro on your Truxedo tonneau cover is a easy process that anyone can do.

Here’s what you need to know: First, you’ll need to purchase some replacement velcro. You can find this at most hardware stores or online.

Be sure to get the right size and type of velcro for your particular model of Truxedo cover. Next, remove the old velcro from the cover. This is usually just a matter of peeling it off.

If it’s stubborn, you may need to use a utility knife to cut through it. Once the old velcro is removed, clean up any adhesive residue that may be left behind. Then simply adhere the new strips of velcro in place and press firmly to set them.

That’s all there is to it!

How to Install a Velcro Tonneau Cover

If you’re looking for an easy way to keep your truck bed covered and protected, a Velcro tonneau cover is a great option. Here’s a step-by-step guide on how to install one: 1. Start by cleaning the truck bed with soap and water to remove any dirt or debris.

This will help the Velcro strips adhere better. 2. Next, measure the length and width of your truck bed so you know what size cover to buy. 3. Once you have the right size cover, peel off the backing on the Velcro strips and attach them to the side rails of your truck bed.

Make sure they’re evenly spaced out so the cover will fit snugly. 4. Now it’s time to attach the cover itself. Start at one end of the truck bed and pull the cover over until it reaches the other end.

Then press down firmly on all sides to ensure that it’s properly secured in place. 5. That’s it! You’ve now installed your new Velcro tonneau cover and can enjoy knowing that your truck bed is protected from weather damage, debris, and more.

Tonneau Cover Stitching Repair

If you have a tonneau cover with stitching that’s coming undone, it’s important to get it repaired as soon as possible. Not only does it look unsightly, but it can also cause the cover to come apart completely. There are two main ways to repair tonneau cover stitching – by hand or by machine.

If you’re handy with a needle and thread, you can try repairing it yourself. However, if the damage is extensive, it’s best to take it to a professional. Machine stitching is much stronger than hand-stitching, so it’s the preferred method for repairing tonneau covers.

It’s also faster and easier than hand-stitching, so you’ll save yourself some time and effort in the long run. To repair your tonneau cover by machine, simply sew over the existing stitches with a heavy-duty sewing machine needle and thread. Start at one end of the damaged area and work your way to the other end.

Be sure to backstitch at both ends to secure the stitches. Once you’ve finished sewing, trim any excess thread and your tonneau cover will be good as new!

Replacement Velcro for Access Tonneau Cover

If you have an Access Tonneau cover, then you know how important it is to keep the Velcro in good condition. Over time, the Velcro can become worn or torn, making it difficult to keep the cover closed. When this happens, it’s time to replace the Velcro.

There are two types of replacement Velcro for Access Tonneau covers: hook and loop. Hook is the type that has small hooks on one side that attach to the loops on the other side. Loop is just the opposite – it has loops on both sides that attach to each other.

Which type of replacement Velcro you need will depend on which type of cover you have. If you’re not sure, it’s best to take a look at your cover and see which kind of fastener it has before ordering replacement Velcro. Once you’ve determined which type of replacement Velcro you need, simply order it online or through a local retailer.

Be sure to measure your existing fastener so you know what size to order. Then simply replace your old fastener with the new one and enjoy having a secure tonneau cover again!

Tonno Pro Replacement Velcro

If you have a Tonno Pro cover, you know how important it is to keep the velcro in good condition. The velcro is what keeps the cover secured to your truck bed, so if it starts to wear out, you’ll need to replace it. Tonno Pro makes replacement velcro strips that are easy to install and will keep your cover functioning like new.

Tonneau Cover Replacement Parts

Tonneau covers are a great way to keep your truck bed and cargo safe from the elements. But over time, even the best tonneau cover can start to wear down and need replacement parts. Here at Truck Bed Cover Experts, we have all the tonneau cover replacement parts you need to keep your cover in top condition.

Whether you need a new seal or a replacement part for your locking system, we have it in stock. We also carry a wide selection of accessories to make sure your tonneau cover is always functioning at its best. And if you’re not sure what part you need, our expert staff is always happy to help.

Give us a call or stop by today and we’ll get you the tonneau cover replacement parts you need to keep your truck bed looking great and keeping your cargo safe from the elements.

Replacement Velcro Strip for Access Tonneau Covers – 1-1/2″ X 17′

If you have an Access tonneau cover, you know how important it is to keep the Velcro strip in good condition. This is what helps to keep the cover secure and in place. Over time, though, the Velcro can become worn or damaged and will need to be replaced.

Fortunately, this is a pretty easy process and only takes a few minutes. You’ll just need to purchase a replacement Velcro strip (they come in different sizes so be sure to get the right one for your cover) and then follow these simple steps: 1. Remove the old Velcro strip from your tonneau cover.

This can be done by gently pulling it off or using a utility knife to cut it away if it’s particularly stubborn. 2. Clean up the area where the old Velcro was attached. This will help ensure that your new strip sticks properly.

3. Apply the new Velcro strip in its place. Press firmly all along the length of the strip to ensure good contact.

Agri Cover Replacement Velcro

If you are in the market for a new agri cover, you may be wondering about the different options available. One option is to purchase an agri cover with replacement velcro. This type of agri cover can be a great option for many reasons.

First, if your original agri cover becomes damaged, you can simply replace the velcro rather than purchasing a whole new cover. Second, replacement velcro is often less expensive than purchasing a new agri cover. Finally, if you are not satisfied with the look of your current agri cover, replacing the velcro allows you to change the look without having to buy a new cover.


If your tonneau cover has seen better days, you may be wondering how to replace the velcro. While it may seem like a daunting task, it is actually quite simple. Here are the steps you need to take:

1. Remove the old velcro strips from the cover and clean the surface beneath them. This will ensure that the new strips adhere properly. 2. Cut new strips of velcro to size and attach them to the cover in the same location as the old ones.

Be sure to press them firmly into place. 3. That’s it! Your tonneau cover should now be as good as new.

Author: Charles King

Charles King is an automotive enthusiast with a keen interest in the latest technologies and products. He likes to educate himself and help other car lovers by sharing his knowledge. This website is a place for him to share his thoughts and experiences.

Leave a Comment